Ultra-Dek® Metal Roof Panel

Ultra-Dek® metal roof panels feature snap-together, trapezoidal leg standing seams. This roof system is commonly used for industrial, commercial and architectural applications and can be erected on various types of construction. Ultra-Dek® panels are available in 18-inch and 24-inch widths. Ultra-Dek® requires a minimum slope of ¼:12.

Ready to Start?

Contact us to find out how Ceco can help build your projects.

Dimensions: 24″ and 18″ wide by 3″ deep
Slope: 1/4:12
Panel Attachment: Concealed Fastening System; Low, High, Fix, Sliding
Gauges: 24 (standard); 22, 26 (optional)
Finishes: Smooth (standard); Embossed (optional)
Coatings: Galvalume Plus®, Signature® 200, Signature® 300
Rib Spacing: N/A
Thickness: N/A
Lengths: 55′ maximum is standard but longer lengths available by special request
Reveal: N/A
Fasteners: The clips are available as sliding or fixed. two different clip heights are available to allow for thermal blocks.

Features

Benefits

Panel penetration is eliminated over the entire building envelope other than at the end laps and panel ends which are connected by a compression joint

Panel side laps arrive at the job site containing a sealant

Factory notched at both ends with pre-punched holes

End laps feature a 16 gauge backup plate with pre-punched holes

High or low clips

UL® 90 and FM rated

Panels interlock by snapping together

Solid connection at end laps and proper fastener spacing, the pre-punched holes improve installation and ensure proper panel placement

Contributes to the system’s weather tight construction and ease of installation

Field installation can begin or finish from either end of the building

Designed to seal out the elements

Accommodates a variety of insulation systems including 1″ thermal spacers at the purlin

Lower insurance costs

Ease of installation and no need for seaming equipment